Monitors pressure or temperature on rotating machinery in hazardous and industrial applications.
See datasheet for complete specifications.
Model 2800 is a snap acting device monitoring low lubricating oil pressure or other control pressure. An emergency stop handle and a trip pressure adjusting screw are standard. Factory set to trip at 10 psi (0.7 bar) and field adjustable, from 5-40 psi (0.35 - 2.8 bar).
A trip Lever is installed on a splined shaft, and can be clamped in any of 36 radical positions to facilitate installation in most applications. The lever permits mechanical linkage between the tripping unit and the engine governor control, fuel pump stop lever or other mechanism. Predrilled holes give a wide range of connection options.
A standard Reset Latch is supplied. The Reset Latch locks the trip lever in the “run” position until oil pressure is up to normal operating pressure, then the latch releases thus arming the device.
Please enter the emails of the people that should receive the request. (you may enter multiple email addresses separated with commas)