8064C Electro/Pneumatic (I/P) Converter

The 8064C Electro/Pneumatic (I/P) Converter controls AMOT pneumatic temperature control valves (G valve).
Electro-Pneumatic Valve System
The electro-pneumatic valve system (see Type G 3-Way Rotary Valves) combines both electric and pneumatic technology, consisting of a pneumatically actuated three-way control valve with an electro-pneumatic converter.

The probe sends a resistance signal to the electronic controller, which in turn sends a 4 to 20mA signal to the 8064C I/P converter that converts this to a pneumatic signal.

The electro-pneumatic system combines the features and functionality of the AMOT electronic control system with the fail-safe action benefits of a pneumatically actuated valve.

Electro-Pneumatic System

Supply pressure:	1.2 to 10 bar	18 to 150 psi
Output:	0.2 to 1 bar	3 to 15 psi
Supply sensitivity:	Less than 0.1% span over full supply pressure range
Flow:	Max 300N l/min (12 scfm)
Air consumption:	<2.5N l/min at 50% signal (0.025 cfm)
Temperature effect:	Typically less than 0.035% of span/°C between -40°C to +85°C (-40°F to +185°F)
Response time:	1 sec (from 0 to 90% or 100 to 10% of output pressure into a 0.5 litre load)
Degree of protection:	IP66, NEMA 4X (when mounted upright)
Linearity:	<0.1% of span
Hysteresis:	<0.1% of span

See datasheet for complete specifications.

General

Other

Literature

General Documents

Parts and Services Documents

Datasheets

Installation Manual

Certifications

Datasheets

Datasheet

8064A/C Electro/Pneumatic (I/P) Converter

test

test 2

test

Overview Brochure

Application Paper

OverviewApplicationsSpecificationsDocumentation

Overview

The 8064C Proportional I/P Converter uses advanced closed loop solid-state electronic control to achieve accurate, high resolution pressure control.

It is available in intrinsically safe and non-incendive type nL versions and its minimum vibration effect and IP66 weatherproof rating make it ideal for field application.

Features and Benefits

Accepts high supply pressure - avoids use of additional regulator
Factory set for ease of installation
Low cost alternative to 8064A
ATEX hazardous area certification

Applications

The 8064C Electro/Pneumatic (I/P) Converter controls AMOT pneumatic temperature control valves (G valve).
Electro-Pneumatic Valve System
The electro-pneumatic valve system (see Type G 3-Way Rotary Valves) combines both electric and pneumatic technology, consisting of a pneumatically actuated three-way control valve with an electro-pneumatic converter.

The probe sends a resistance signal to the electronic controller, which in turn sends a 4 to 20mA signal to the 8064C I/P converter that converts this to a pneumatic signal.

The electro-pneumatic system combines the features and functionality of the AMOT electronic control system with the fail-safe action benefits of a pneumatically actuated valve.

Electro-Pneumatic System

Specifications

Supply pressure:	1.2 to 10 bar	18 to 150 psi
Output:	0.2 to 1 bar	3 to 15 psi
Supply sensitivity:	Less than 0.1% span over full supply pressure range
Flow:	Max 300N l/min (12 scfm)
Air consumption:	<2.5N l/min at 50% signal (0.025 cfm)
Temperature effect:	Typically less than 0.035% of span/°C between -40°C to +85°C (-40°F to +185°F)
Response time:	1 sec (from 0 to 90% or 100 to 10% of output pressure into a 0.5 litre load)
Degree of protection:	IP66, NEMA 4X (when mounted upright)
Linearity:	<0.1% of span
Hysteresis:	<0.1% of span

See datasheet for complete specifications.

Documents & Drawings

Datasheet

8064A/C Electro/Pneumatic (I/P) Converter

8064C Electro/Pneumatic (I/P) Converter

Overview

Features and Benefits

Applications

Specifications

Documents & Drawings

Datasheet

Site Map